EPDM Coatings have Liquid Roof and Liquid Rubber which are the most suitable products for stop the leaking roofs. Metal Roofing magazine has awarded EPDM, top 10 products of 2009.
Wednesday, February 17, 2010
Winter season leads to roof leaks and EPDM is a ultimate repair for it
After every winter season, all roofs needs inspection for leaks. Winter season always leads to roof leaks and the solution for it is to repair or replace roof. There are a number of factors that may lead to roof leaks so there is not a simple answer. One of the most common causes of leaking roofs in winter is clogged or improperly installed gutters. This will cause water to overflow over the back and leak along the inside walls and inside the home. In addition, flue pipes inside of a chimney may cause water to leak if they are not properly aligned. Improperly installed or defective siding and windows are among other common causes for roof leaks. When a roof leaks after heavy, wind-driven rain, it is usually caused by a problem with the windows or siding. During the winter, a roof leak along the inside walls or basement is most commonly caused by an ice dam.
EPDM Coatings have Liquid Roof and Liquid Rubber which are the most suitable products for stop the leaking roofs. Metal Roofing magazine has awarded EPDM, top 10 products of 2009.
EPDM Coatings have Liquid Roof and Liquid Rubber which are the most suitable products for stop the leaking roofs. Metal Roofing magazine has awarded EPDM, top 10 products of 2009.
Sunday, January 24, 2010
Liquid Rubber for Coating Plywood
Liquid Rubber Coatings has been used directly over plywood to make a finished roof in situations where expediency and minimal cost were the primary considerations. Although this procedure results in a weaker roof structure, water-tightness can be achieved if the application is performed carefully. The joint between sheets should be positioned directly over a roof truss and securely fastened to prevent warping. Next, to seal the pores, coat plywood with an oil based primer. Allow an overnight cure. Seal the joint by bridging it with a 6" wide polyester fabric strip.
Apply a light coat of EPDM rubber over the joint, lay fabric into wet rubber and smooth out wrinkles. Complete job by applying a liberal coat of Liquid Rubber over entire roof surface, being especially careful to completely cover the fabric over the joint without skips or pinholes. Using an oil base primer on the wood considerably improves the appearance of a one-coat application of Liquid Rubber.
Liquid Rubber is excellent for Wood Surfaces Repair Product; Liquid Rubber can be applied to wood. We recommend first applying a primer coat using an oil base primer and then the Liquid Rubber after the primer has dried. Liquid Rubber can be colored using "universal" colorants available at any paint store. You can add up to one cup per gallon of paint thinner for easier handling when going over wood. Liquid Rubber is slippery when there is only a fine mist of water on its surface. Silicone and oil-based materials are considered unstable and should be avoided.
Apply a light coat of EPDM rubber over the joint, lay fabric into wet rubber and smooth out wrinkles. Complete job by applying a liberal coat of Liquid Rubber over entire roof surface, being especially careful to completely cover the fabric over the joint without skips or pinholes. Using an oil base primer on the wood considerably improves the appearance of a one-coat application of Liquid Rubber.
Liquid Rubber is excellent for Wood Surfaces Repair Product; Liquid Rubber can be applied to wood. We recommend first applying a primer coat using an oil base primer and then the Liquid Rubber after the primer has dried. Liquid Rubber can be colored using "universal" colorants available at any paint store. You can add up to one cup per gallon of paint thinner for easier handling when going over wood. Liquid Rubber is slippery when there is only a fine mist of water on its surface. Silicone and oil-based materials are considered unstable and should be avoided.
Thursday, December 31, 2009
Mixing of Liquid EPDM
Mixing of Liquid EPDM Rubber with catalyst. Working time for each container is 4-6 hours once catalyst is mixed.
Saturday, December 19, 2009
Application and Uses Of Liquid Rubber
• Metal - Coated or Galvanized Steel Weathered Aluminum
• Weathered Copper
• EPDM Rubber membrane
• Concrete (except foot traffic surfaces)
• Urethane Foam
• Primed Wood
• Fiberglass EPDM lined fish ponds
• PVC Sheet and Pipe
• Acrylic Sheet
• Sponge Rubber insulation
• EPDM Rubber Membrane on flat or sloped Roofs
• Weathered Steel Siding
• Weathered Fiberglass
• Weathered standing seam and corrugated metal roofs
• Weathered Vinyl, PVC and Polycarbonate plastic
• Foam insulation for pipe
• Cast Concrete foundations
• Weathered Copper
• EPDM Rubber membrane
• Concrete (except foot traffic surfaces)
• Urethane Foam
• Primed Wood
• Fiberglass EPDM lined fish ponds
• PVC Sheet and Pipe
• Acrylic Sheet
• Sponge Rubber insulation
• EPDM Rubber Membrane on flat or sloped Roofs
• Weathered Steel Siding
• Weathered Fiberglass
• Weathered standing seam and corrugated metal roofs
• Weathered Vinyl, PVC and Polycarbonate plastic
• Foam insulation for pipe
• Cast Concrete foundations
Application of Liquid Rubber
Tuesday, November 17, 2009
Roof Repair Factors
Roof leaks repair doesn’t have to be scary. There are tough roofs to work on no doubt. Attempting roof repairing on a steep slate roof repair should be left to the professionals. The same is true for metal roof repair or even tile roof repair. These are tricky materials to work with. But you should be able to successfully do home roof repair if you have a low-slope roof, a cool day and the right attitude.
The most important factor in any roof repair job is which contractor you choose. A good roofing contractor will check the area surrounding the leak in your roof for any sort of water damage. They should be able to let you know whether or not there is rot or water damage present, and whether or not it's bad enough to need repair immediately. In today's economy, cost is another important factor for roof repairs. There are many types of roofs here in Miami, and each type is going to have a different price range for repairs depending upon supply cost and availability of experienced contractors.
Roofs may need replacing for several reasons. It may be leaking and be more economical to replace rather than repair it. The roof may not be working correctly or does not look good. Another reason for replacing the roof may be because you are extending your home and want the roof to look fully uniform.
Over the past 45 years, EPDM single-ply membrane have grown considerably in market share compared with their modified bitumen and built-up competition. As a result, there are many aging EPDM roofs, and consultants will be faced with the task of providing cost-effective, durable solutions to keep the roofs in proper work¬ing order without tearing them off entirely.
Several factors come into play and impact consultants’ decisions regarding the end of a roof system’s useful life. Thermal bridging, proper drainage, R-value, surface color, wind uplift, and hail resistance are all important factors to consider. When every¬ thing is taken into account, consultants are faced with two primary choices when addressing an aged EPDM roof besides a complete tear off and replacement: restora¬tion and re-cover.
If we talk about the products that are available in the market for leaks repair. The common products include Elastomeric roof coatings that are Liquid Roof and Liquid Rubber. These are the most effective products by way of cost and repair.
The most important factor in any roof repair job is which contractor you choose. A good roofing contractor will check the area surrounding the leak in your roof for any sort of water damage. They should be able to let you know whether or not there is rot or water damage present, and whether or not it's bad enough to need repair immediately. In today's economy, cost is another important factor for roof repairs. There are many types of roofs here in Miami, and each type is going to have a different price range for repairs depending upon supply cost and availability of experienced contractors.
Roofs may need replacing for several reasons. It may be leaking and be more economical to replace rather than repair it. The roof may not be working correctly or does not look good. Another reason for replacing the roof may be because you are extending your home and want the roof to look fully uniform.
Over the past 45 years, EPDM single-ply membrane have grown considerably in market share compared with their modified bitumen and built-up competition. As a result, there are many aging EPDM roofs, and consultants will be faced with the task of providing cost-effective, durable solutions to keep the roofs in proper work¬ing order without tearing them off entirely.
Several factors come into play and impact consultants’ decisions regarding the end of a roof system’s useful life. Thermal bridging, proper drainage, R-value, surface color, wind uplift, and hail resistance are all important factors to consider. When every¬ thing is taken into account, consultants are faced with two primary choices when addressing an aged EPDM roof besides a complete tear off and replacement: restora¬tion and re-cover.
If we talk about the products that are available in the market for leaks repair. The common products include Elastomeric roof coatings that are Liquid Roof and Liquid Rubber. These are the most effective products by way of cost and repair.
Friday, October 30, 2009
Coating Cast Concrete
Concrete which has not been trowel finished will have a surface that is more porous than one which has been trowelled. When Liquid Rubber is applied directly to such a porous surface it will produce a high density of small craters in the resulting membrane. This is caused by the fact that Liquid Rubber actually penetrates into the pores, leaving a crater on surface . The following procedure is recommended to prevent formation of surface craters:
1) Apply a light coat of one of the following products to seal the surface:
a.) Water based acrylic elastomeric coating( primer or base -coat version)
b.) Solvent based chlorinated rubber or Hypalon product.
c.) Solvent based neoprene product.
The choice of water or solvent based product should be based on temperature and humidity conditions. For water based products, relative humidity should be less than 70% and temperature 60 degrees or higher. Solvent based products should be used at low temperatures and high relative humidity.
2) Liquid Rubber may be applied when primer application is sufficiently dry. Water based products should be allowed to dry thoroughly, as any surface moisture will interfere with the adhesion of the rubber. A single coat of Liquid Rubber is preferable to multiple coats.
1) Apply a light coat of one of the following products to seal the surface:
a.) Water based acrylic elastomeric coating( primer or base -coat version)
b.) Solvent based chlorinated rubber or Hypalon product.
c.) Solvent based neoprene product.
The choice of water or solvent based product should be based on temperature and humidity conditions. For water based products, relative humidity should be less than 70% and temperature 60 degrees or higher. Solvent based products should be used at low temperatures and high relative humidity.
2) Liquid Rubber may be applied when primer application is sufficiently dry. Water based products should be allowed to dry thoroughly, as any surface moisture will interfere with the adhesion of the rubber. A single coat of Liquid Rubber is preferable to multiple coats.
Subscribe to:
Posts (Atom)